Materials

Powder-coated aluminium

  • Fluidised powder coating applied to the aluminium structure by electrostatic spray. To ensure the solidity and resistance of the powder coating, the whole thing is stoved at a temperature of between 160°C (320°F) and 210°C (410°F), according to the type of powder.
  • For outdoor and indoor use.

Maintenance: easy to clean with water or specific alu cleaner. Avoid the use of abrasive products and solvents.

GLASS (acid etched glass)

  • Hardened glass, acid etched on the top, coloured on the bottom side.
  • Tensile strength: intrinsic tensile strength 10,000 N/mm2.
  • Scratch resistant (clearly sharp objects may cause scratches on the surface of the glass).
  • Thermal conductivity: 0.8W/mk
  • For outdoor and indoor use.
  • Thickness: 8mm.

Maintenance: easy to clean with water or specific glass cleaner. Avoid the use of abrasive products and solvents.

CERAMIC

  • Obtained by wet-grinding clay, granite and metamorphic rock raw materials together with a feldspar component and ceramic pigments. Specially shaped in a compactor and sintered at 1200°C, with gas firing.
  • Resistant to heat, high temperatures, UV-light, humidity, mould, fungi and frost.
  • Resistant to scratching and abrasion.
  • Resistant to detergents and cleaning products.
  • For outdoor and indoor use.
  • Thickness: CEW/CEB 6 mm, CESB/CEBO 9.5 mm or 11.5 mm

Maintenance: easy to clean with water or specific ceramic cleaner. Avoid the use of abrasive products and solvents.

TRESPA®

  • HPL = High Pressure Laminate. Flat thermo hardening resin-based sheet, homogenously reinforced with wood-based fibres and manufactured at high pressure and temperature.
  • The visible side is covered in a decorative surface using the patented EBC technology.
  • For all colours the border has a black finish.
  • For outdoor and indoor use.
  • Thickness: 13mm.

Maintenance: easy to clean with water or specific Trespa® cleaner. Avoid the use of abrasive products and solvents.

TEAK

  • Superior quality of teak wood (VINIR & HARA) aged 60 to 80 years,
  • sourced from ecological plantations.
  • Great stability under the effect of UV radiation, chlorine and sea water.
  • 100% recyclable.
  • For outdoor and indoor use.

Maintenance: easy to clean and maintain, various specific treatments possible. Avoid the use of abrasive products and solvents and high pressure cleaning.

WICKER (round cord)

  • A synthetic fibre (HDPE), high quality thermoplastic fibre.
  • Dyed in the mass, UV-resistant.
  • Toxin-free, ecological, 100% recyclable.
  • Swimming pool and sea water resistant and repellent.
  • For outdoor and indoor use.
  • Thickness: 2mm.

Maintenance: easy to clean with water or specific wicker cleaner. Avoid the use of abrasive products and solvents and high pressure cleaning.

ROPE

  • Outside: Olefin cover. Inside filling: Polyester
  • Dyed in the mass, UV-resistant.
  • Mildew resistant.
  • Swimming pool and sea water resistant and repellent.
  • For outdoor and indoor use.
  • Width: 11 mm

Maintenance:easy to clean with water or a specific mild detergent. Avoid the use of abrasive products and solvents and high pressure cleaning.

TEXTILENE®

  • Polyester with PVC coating.
  • Dyed in the mass, UV-resistant.
  • Swimming pool and sea water resistant and repellent.
  • For outdoor and indoor use. 

Maintenance: easy to clean with water or specific Textilene® cleaner. Avoid the use of abrasive products and solvents and high pressure cleaning.

BATYLINE®

  • 85% polyester/PVC compound, 15% polyurethane.
  • Dyed in the mass, UV-resistant.
  • Swimming pool and sea water resistant and repellent.
  • For outdoor and indoor use. 

Maintenance: easy to clean with water or specific Batyline® cleaner. Avoid the use of abrasive products and solvents and high pressure cleaning.

WATERPROOF BATYLINE®

  • 17% synthetic fibres, 60% PVC, 23% PES.
  • Dyed in the mass, UV-resistant.
  • Laminated for resistance to water penetration.
  • Swimming pool and sea water resistant and repellent.
  • For outdoor and indoor use.

Maintenance: easy to clean with water or specific Batyline® cleaner. Avoid the use of abrasive products and solvents and high pressure cleaning.

FABRIC

  • 100% solution dyed acrylic.
  • Dyed in the mass, UV-resistant.
  • Swimming pool and sea water resistant and repellent.
  • For outdoor and indoor use.

Maintenance: easy to clean by following the washing instructions. Avoid the use of abrasive products and solvents.

SUNBRELLA® FABRIC

  • 100% solution dyed acrylic.
  • Dyed in the mass, UV-resistant.
  • Swimming pool and sea water resistant and repellent.
  • For outdoor and indoor use.

Maintenance: easy to clean by following the washing instructions. Avoid the use of abrasive products and solvents.

WATERPROOF FABRIC

  • 57% polypropylene, 38% polyester, 5% polyurethane.
  • Dyed in the mass, UV-resistant.
  • Laminated for resistance to water penetration.
  • Swimming pool and sea water resistant and repellent.
  • For outdoor and indoor use. 

Maintenance: easy to clean by following the washing instructions. Avoid the use of abrasive products and solvents.